Return to E-Learning

Configuring the Kvaser DIN Rail SE400S-X10

This is an introductory course on the Kvaser DIN Rail SE400S, organized into seven short sections. The objective is to show how to start up the Kvaser DIN Rail SE400S and make sure the correct connections are used for the separate ground. The course will also show you how to update the firmware and readout the current version so you can be sure that all modules have been updated.

Sign In

Checking Firmware

Video Transcript

In this section, we’re going to use a t script to check for the firmware versions. The t script is provided as a file below.

To run the t script, go to the Kvaser CANlib SDK in the programs menu. Select the ‘TRX’ application. In TRX, go to menu, ‘Open File’. Select the t script that we just downloaded and open it. Your t script should look like this.

In order to run the t script, connect to the DIN Rail, download the t script and press ‘Run’. If the firmware is not updated, it will look like this.

After the first run of the firmware, it will look like this:

After the second run of the firmware, it will look like this:

This is an introductory course on the Kvaser DIN Rail SE400S, organized into seven short sections. The objective is to show how to start up the Kvaser DIN Rail SE400S and make sure the correct connections are used for the separate ground. The course will also show you how to update the firmware and readout the current version so you can be sure that all modules have been updated.

read more