[C:\]mhydraformat.exe --help
Disk formatting program for Kvaser Memorator (2nd generation) devices.

-h       --help            | Print this information.
-d=DRIVE --drive=DRIVE     | The drive to format, e.g. F:
-r=X     --reserve=X       | The number of MB to reserve for user files.
-c=X     --config=X        | The number of MB to reserve for configurations.
         --fat16           | Format the disk with FAT16. Default is FAT32.
-i       --interactive     | Require the user to confirm before format.
-q       --quiet           | Stop all outputs. Overrides -i.
         --bin5            | Use the older, smaller version 5 of PARAM.LIF.
         --lio3            | Use the older LIO data format 3 for KMF files.

Example:
         mhydraformat -d=F: -r=100 -c=10 --interactive

dir E:
 Volume in drive E has no label.
 Volume Serial Number is 5C92-4738

 Directory of E:\

2016-02-23 08:41                  0 dummy_file
              1 File(s)               0 bytes
              0 Dir(s)   16 129 335 296 bytes free
mhydraformat.exe -d=E: -r=10000 -c=10
Formatting...done.
dir E:
 Volume in drive E has no label.

 Directory of E:\

2016-02-23 08:45 10 485 760 PARAM.LIF
2016-02-23 08:45 1 073 741 824 LOG00000.KMF
2016-02-23 08:45 1 073 741 824 LOG00001.KMF
2016-02-23 08:45 1 073 741 824 LOG00002.KMF
2016-02-23 08:45 1 073 741 824 LOG00003.KMF
2016-02-23 08:45 1 073 741 824 LOG00004.KMF
2016-02-23 08:45 736 649 216 LOG00005.KMF
2016-02-23 08:45 10 010 624 DATABASE.BIN
8 File(s) 6 125 854 720 bytes
0 Dir(s) 10 004 480 000 bytes free
echo
ECHO is on.

# Our SD card is mounted under E:, so that is where our
# binary configuration should be placed.
filename = "E:\\PARAM.LIF"
 
xl = kvaMemoLibXml.kvaMemoLibXml()
print "kvaMemoLibXml version: v%s" % xl.getVersion()
 
# Convert the previously validated XML configuration file
# and write the resulting binary configuration to SD card
xl.kvaXmlToFile("config.xml", filename)

import zipfile
 
# Our SD card is mounted under E:
filename = "E:\\config.zip"

# Creating zip archive
with zipfile.ZipFile(filename, mode='w',
                     compression=zipfile.ZIP_DEFLATED) as zipf:
    # Adding files to zip archive
    zipf.write("config.xml")
    zipf.write("myCanGenerator.txe")

ml = kvmlib.kvmlib()
  
# Our SD card is mounted under E:, so our LOG00000.KMF can
# be opened from here
filename = "E:\\LOG00000.KMF"

try:
    # Open the SD card
    # We have firmware version 3.0 in the device this SD card will
    # be inserted into, this means that the FW is using Lio Data
    # Format v5.0 and we should use kvmDEVICE_MHYDRA_EXT as
    # the deviceType
    lioDataFormat = ml.kmfOpenEx(filename,
                                 deviceType=kvmlib.kvmDEVICE_MHYDRA_EXT)
    print "Lio Data Format v%s" % lioDataFormat

    # Close SD card
    ml.close()

    # Verify that the LIO data format of the card corresponds to
    # the device type we used when opening the device
    if lioDataFormat != '5.0':
        print "Unexpected Lio Data Format:", lioDataFormat
        if lioDataFormat == '3.0':
            print("This log file can be read if you reopen the"
                  " device as kvmDEVICE_MHYDRA.")
        exit(1)
except kvmlib.kvmDiskNotFormated:
    print "SD card is not initialized..."
    exit(1)

import glob
import os

ml = kvmlib.kvmlib()

# Our SD card is mounted under E:, so our LOG00000.KMF can
# be opened from here
filename = "E:\\LOG00000.KMF"

# Directory to put the resulting files in
resultDir = "result"

# Make sure the result directory exists and is empty
if os.path.isdir(resultDir):
    files = glob.glob(os.path.join(resultDir, "*"))
    for f in files:
        os.remove(f)
else:
    os.mkdir(resultDir)
os.chdir(resultDir)
 
# Open the SD card
# We have earlier verified that the SD card is using Lio Data Format v5.0
# and we should use kvmDEVICE_MHYDRA_EXT as the deviceType
ml.kmfOpen(filename, deviceType=kvmlib.kvmDEVICE_MHYDRA_EXT)
  
# Read number of recorded logfiles
fileCount = ml.logFileGetCount()
print "Found %d file%s on card:" % (fileCount,
                                    "s" if fileCount > 1 else "")

# Loop through all logfiles and write their contents to .kme50 files
for fileIndx in range(fileCount):
    eventCount = ml.logFileMount(fileIndx)
    print "\tFile %3d: %10d events" % (fileIndx, eventCount)
    logEvent = ml.logFileReadEventLogFormat()
 
    # The first logEvent contains device information
    memoEvent = logEvent.createMemoEvent()
    sn = memoEvent.serialNumber
    ean_lo = memoEvent.eanLo
    ean_sn = "%05x-%x_%d" % ((ean_lo >> 4) & 0xfffff, ean_lo & 0xf, sn)

    # Add EAN and serial number info to filename
    logfileName = "log_%s_%d.kme50" % (ean_sn, fileIndx)
    ml.kmeCreateFile(logfileName, kvmlib.kvmFILE_KME50)
    while logEvent is not None:
        # Write event to stdout
        print logEvent
        ml.kmeWriteEvent(logEvent)
        # Read next event
        logEvent = ml.logFileReadEventLogFormat()
    ml.kmeCloseFile()
  
# Delete all logfiles
ml.logFileDeleteAll()
  
# Close device
ml.close()

import glob
import os
import shutil

# Our SD card is mounted under E:, so our LOG00000.KMF can
# be opened from here
filename = "E:\\LOG00000.KMF"

for file in glob.glob(os.path.join(os.path.dirname(filename), "*")):
    if(os.path.splitext(file)[1].lower() == '.kmf'
       or file.lower() == 'param.lif'
       or file.lower() == 'database.bin'):
        print "Skipping %s" % file
    else:
        print "Copying %s" % file
        shutil.copy(file, ".")

深入了解kvmlib 第三篇